Mighty Adhesive Malaysia - leading manufacturer of PVC Solvent Cement in Asia

[ PVC Solvent Cement ] [ PTFE Thread Seal Tape ]

MIGHTY EXTRA NO.70 PVC SOLVENT CEMENT

Solid Content : 24% Solvent Consist of : MEK, CYC.

Consistency Property : 1,000 cps. Color : Transparence

Quality : Tough & Resilient. Standard : BS-4346-Part 3

"MIGHTY EXTRA NO. 70 PVC SOLVENT CEMENT" is a highly soluble fast-dry PVC Solvent Cement. It has an exceptionally strong and stable quality. It is especially suitable for joining all ABS or uPVC pipes from 15 mm - 75 mm diameters. When it is used in uPVC pipes it will instantly dissolve and blend with the pipe to produce a film (wall) of 0.4 mm thick, so that the fitting gap will be strong and stable. It is important to note that during setting time this solvent cement’s strong chemical reaction on the pipe produces a slight "springing" force, and so it is essential that immediately after its assembly the pipe must be tightly held in place and shall only be released after the recommended straining time as stipulated below. If released prematurely, the pipe to be fitted will spring apart. (This solvent cement may not be used if the pipe or fitting is made of partly recycle material)

STRAINING TIME

Pipes with diameter 15 mm (½") 10 seconds.

Pipes with diameter 25 mm (1") to 32 mm (1¼") 8 seconds.

Pipes with diameter 50 mm (2") 6 seconds.

Pipes with diameter 75 mm (3") 4 seconds.

MIGHTY EXTRA NO.10 PVC SOLVENT CEMENT

Solid Content : 24% Solvent Consist of : MEK, CYC, THF

Consistency Property : 1,000 cps. Color : Transparence

Quality : Tough & Resilient. Standard : BS-4346-Part 3

"MIGHTY EXTRA NO. 10 PVC SOLVENT CEMENT" is a highly soluble slow-dry PVC Solvent Cement. It has an exceptionally strong and stable quality. It is especially suitable for joining all ABS or uPVC pipes from 75 mm - 200 mm diameters. When it is used in uPVC pipes it will instantly dissolve and blend with the pipe to produce a film (wall) of 0.4 mm thick, so that the fitting gap will be strong and stable. It is important to note that during setting time this solvent cement’s strong chemical reaction on the pipe produces a slight "springing" force, and so it is essential that immediately after its assembly the pipe must be tightly held in place and shall only be released after the recommended straining time as stipulated below. If released prematurely, the pipe to be fitted will spring apart. (This solvent cement may not be used if the pipe or fitting is made of partly recycle material)

STRAINING TIME

Pipes with diameter 25 mm (1") 20 seconds.

Pipes with diameter 32 mm(1 ¼") to 50 mm (2") 16 seconds.

Pipes with diameter 75 mm (3") to 100 mm (4") 12 seconds.

Pipes with diameter 150 mm (6") 8 seconds.

Pipes with diameter 200 mm (8") 4 seconds.

MIGHTY EXTRA NO.11 PVC SOLVENT CEMENT

(This solvent cement is specially formulated for joining Non-Standard uPVC pipes & fittings)

Solid Content : 40% Solvent Consist of : MEK, CYC, THF

Quality : Tough & Resilient. Color : Transparence

"MIGHTY EXTRA NO. 11 PVC SOLVENT CEMENT" is a highly soluble slow-dry PVC Solvent Cement. It has a distinctive characteristic of having a consistency property exceeding 5,000 cps. and it has an exceptionally strong and stable quality. It is especially suitable for joining all ABS or uPVC pipes of over 100 mm diameter or where the uPVC pipe’s fitting gap is too big for ordinary solvent cement can not be effective. When it is used in uPVC pipes, it will instantly dissolve and blend with the pipe to produce a film (wall) of 0.8 mm thick, so that the fitting gap will be strong and stable. It is important to note that during setting time this solvent cement’s strong chemical reaction on the pipe produces a slight "springing" force, and so it is essential that immediately after its assembly the pipe must be tightly held in place and shall only be released after the recommended straining time as stipulated below. If released prematurely, the pipe to be fitted will spring apart. (This solvent cement may not be used if the pipe or fitting is made of partly recycle material)

STRAINING TIME

Pipes with diameter 25 mm (1") and above 30 seconds.

Pipes with diameter 32 mm(1 ¼") to 50 mm (2") 26 seconds.

Pipes with diameter 75 mm (3") to 100 mm (4") 22 seconds.

Pipes with diameter 150 mm (6") 18 seconds.

Pipes with diameter 200 mm (8") 8 seconds.

Attention:
1. Temperatures below 15˚C (50˚F) will extend the straining period for another 5 minutes for each type of pipe.
2. These Solvent Cement may not be used if the uPVC or fitting is made of partly recycled material.

PACKING Ctn Size

3kg x 8 Tins per ctn. 440mm x 360mm x 260mm

500g. (with brush) x 20 Tins per ctn. 508mm x 220mm x 225mm

100g. (with brush) x 60 Tins per ctn. 508mm x 220mm x 225mm

14 g. x 240 Tubes per ctn 508mm x 220mm x 225mm

SOLVENT CEMENT REQUIREMENT FOR uPVC PIPES & PVC FITTINGS

Nominal Size of Pipe of Fitting Amount of Solvent Cement required per joint Number of Possible Joints

ins mm g. 14 g. 100 g. 500 g. 3 kg.

1/2 16 1.3 10 76 383 2300

3/4 20 2.0 7 55 250 1500

1 25 2.5 5 40 200 1200

11/4 30 3.2 4 30 156 937

11/2 40 5.0 2 20 100 600

2 50 7.2 1 13 69 416

3 75 12.0 - 8 41 250

4 100 15.5 - 6-3 32 193

6 150 26.0 - 2 19 115

8 200 49.0 - 1 10 61

10 250 75.5 - - 6 39

12 300 108.0 - - 4 27

14 350 146.0 - - 3 20

16 400 200.0 - - 2 15

18 450 250.0 - - 2 12

DIRECTION OF USE (NO. 70, NO.11):-

1. Saw at the point to be mated, ensuring that the end of the pipe or fitting to form the spigot is cut at right angles to its axis. Remove any scarf and other debris from the joining surface.

2. Clean the mating surface with a suitable uPVC cleaning fluid.

3. & 4. Dip the clean brush (Please refer to recommendations on brush) into solvent cement and apply it evenly, by stroking along (and not round) the clean and dry mating surface.

5. Connect and fit the pipes to the mating surface properly and securely together. Avoid any vibration or movement initially until the recommended straining time is over.

6. Full pipes pressure can be applied in about twenty-four (24) hours after joining.

RECOMMENDATIONS ON BRUSH :-
A: Pipes with diameter 25mm(1") and below - use brush as accompanied and affixed to can.
B: Pipes with diameters 32mm to 50mm (1 1/4" to 2") - use separate 1" brush.
C: Pipes with diameters 75mm to 200mm (3" to 8") - use separate 2" brush.

PRESSURE TEST:-
[ No. 70 & No. 10 ]

TEST PRESSURE DRYING TIME

Cold Water (20˚C) Below 12 kg/cm²(171 psi) After 1 hour

Hot Water (60˚C) Below 12 kg/cm²(171 psi) After 2 hours

[ No. 11 ]

TEST PRESSURE DRYING TIME

Cold Water (20˚C) Below 10 kg/cm²(142 psi) After 2 hours

Hot Water (60˚C) Below 10 kg/cm²(142 psi) After 4 hours

SAFETY DATASHEET
Composition / Information on Ingredient:

Ingredient

PVC
Resin

Cyclohexanone
(C.Y.C.)

Methyl Isobutyl
Ketone (MIBK)

T.H.F.

Methyl Ethyl
Ketone (MEK)

CAS No.
9003-22-9 108.94.1 141.79.7 109.99.9 78.93.3

% - Volume
24% 30% 11% 4% 55%

Physical and Chemical Properties
Appearance : Clear Flash Point : 15˚C

Flammable Mixture (UN No. 1133)
This solvent cement material will ignite at ambient temperatures. Colourless vapors may travel considerable distance to ignition sources and cause flash fires or explosions

Hazard Identification
May cause eyes and skin irritation, burns or dermatitis.

First Aid Measures
Immediately flush eyes and skin with plenty of water for at least 15 minutes. Get medical attention immediately.

Storage
Store in well-ventilated area. Keep away from heat, sparks and flame.

Safety Phase
- Keep away from sources of ignition - No-Smoking.
- Avoid contact with eyes.
- In case of fire, use chemical powder, foam or carbon dioxide

Site by JustSimple Dotcom